Flatbed Products

Winches

Multiprens winches offer a system for securing cargo on flatbed trailers and other vehicles. Multiprens stocks a variety of winches available for specific applications.

All Multiprens winches are manufactured to meet the requirements of the Department of Transportation (DOT) and the California Highway Patrol (CHP). Multiprens winches can be used with 2”, 3” or 4” heavy-duty flatbed webbing straps.

Standard height winches are for bottom mounting only.
Low Profile winches are for side mounting.
Deep Storable winches are for bottom mounting and offer added storing capacity.

Weld-on Winches

Multiprens Weld-On Winches are mounted permanently in a fixed position. Winches are available Standard, Low Profile and Deep Storable models.

Portable Winches

Multiprens Portable Winches allows the winch to be placed anywhere along the trailer side rail. All portable winches come with 2 set-screws. Winches are available Standard, Low Profile and Deep Storable models.

Sliding Winches and Sliding Winch Track

Multiprens Sliding Winches are designed to move easily in both directions of Multiprens Sliding Winch Track (4500). The winch will fasten in place once pressure is applied to the webbing. Sliding Winches can also be welded in place for fixed applications. Winches are available in Standard, Low Profile and Deep Storable models.

Sliding Winches – Other Track

Winches below applicable with certain types of sliding track. Contact customer service for more information.

Winch Specifications

Part Number
A (mm/Inches)
B (mm/Inches)
C (mm/Inches)
D (Inches/MM)
Weight (kgs/lbs)
199.5 / 7.85
124.0 / 4.88
140.0 / 5.51
3.54 / 90.0
3.40 / 7.5
199.5 / 7.85
124.0 / 4.88
110.0 / 4.33
3.94 / 100.0
3.80 / 8.4
199.5 / 7.85
124.0 / 4.88
190.0 / 7.48
3.54 / 90.0
4.20 / 9.2
199.5 / 7.85
124.0 / 4.88
140.0 / 5.51
3.54 / 90.0
4.36 / 9.6
199.5 / 7.85
124.0 / 4.88
106.0 / 4.17
3.94 / 100.0
4.14 / 9.1
199.5 / 7.85
124.0 / 4.88
190.0 / 7.48
3.54 / 90.0
5.01 / 11.0
199.5 / 7.85
124.0 / 4.88
160.0 / 6.30
3.94 / 100.0
4.00 / 8.8
199.5 / 7.85
140.0 / 5.51
140.0 / 5.51
3.94 / 100.0
4.10 / 9.0
199.5 / 7.85
124.0 / 4.88
190.0 / 7.48
3.94 / 100.0
4.26 / 9.4
199.5 / 7.85
124.0 / 4.88
140.0 / 5.51
3.54 / 90.0
5.88 / 12.9
199.5 / 7.85
124.0 / 4.88
160.0 / 6.30
3.43 / 87.0
3.84 / 8.4

To insure proper engagement, all winches shall be installed so the user can see the pawl. Additionally, the winch shall be positioned so the pawl drops into the ratchet teeth by gravity. Winches shall never be installed in a position where the user cannot see the pawl engagement, or where they must hold the pawl to engage the ratchet tooth. All winches, except portable and sliding styles, must be welded or bolted to the vehicle structure. Minimum welding requirements are 1/4″ fillet weld, 4″ long on both sides of the frame and 1/8″ penetration. If winches are installed in track, the track shall be attached to the vehicle structural members. The vehicle structure should have equal or greater strength than the winch.

Flatbed Products

Multiprens winches offer a system for securing cargo on flatbed trailers and other vehicles. We stock a variety of winches available for specific applications.

Interior Van Products

Multiprens brings to the heavy duty trucking industry Pressure Release Load Bars. This INNOVATIVE and ECONOMICAL Pressure Release Load Bar solves the industry's problem of “blown out" trailer walls.

Hardware

Multiprens USA stocks a wide variety of Exterior and Interior Ratchet Buckles, Cam Buckles, and Heavy Duty end fittings for strap assemblies.

Auto Tiedown

Multiprens USA now adds towing and hauling to our line of products for the trucking industry. Whether you are going to haul a car a truck or any other vehicle we have the tie down for your specific requirement.

MULTISAFE Products

Multiprens USA's newest safety and securement product line.