3/8″ – 1/2″ G70 Lever Binder
Multiprens’ heavy duty chain binders are ideal in the trucking industry for chain binding applications. All Chain binders are manufactured with high strength drop forged steel. Our Grade 70 Forged Lever Binder has a working load limit of 4,181.82 kgs / 9,200.00 lbs.
| Weight | 5.45 kgs / 12.00 lbs |
|---|---|
| WLL | 4,181.82 kgs / 9,200.00 lbs |
| Material | Grade 70 Steel |
| Color | Red |
| Finish | Electrostatic Powder Coating |
Multiprens 3/8″ – 1/2″ G70 Lever binder is a great option for securing your chains. Our chain binders are manufactured with high strength drop forged steel. The powder coated finish deters corrosion.
Fully extend the chain binder and hook the chain to the tension hooks. One hook close to your anchor point and the other close to your cargo. Our 3/8″ chain along with our chain binder will assure a secure load.
Our binders are coated with a rust inhibiting paint. Lubricating all moving parts periodically with rust inhibiting oil is recommended. Be sure not to over tighten the chain and follow installation directions.
Assembly WLL: 4,181.82 kgs / 9,200.00 lbs
Material: Grade 70 Steel
Shelf Length (Inches): 17.25
Shelf Width (Inches): 8
Shelf Height (Inches): 2.75
Color: Red
Finish: Electrostatic powder coating
Product Category: Chain Load Binders
Country of Origin: China
Unit Packaging: 1
Standard Pack Unit Quantity: 5
Inspect chain binder for defects before each use. Do not use if defective, do not repair, immediately remove from service.
Handle extensions (cheater bars) should not be used on any binder. Use of a cheater bar can create enough force to break the securement during installation, release or while in transit. The release of energy when the cargo securement breaks can cause serious injury or death to you or bystanders.
Binders should be matched with the equivalent grade of chain.
Binders should be checked and adjusted periodically during transit to maintain proper tension.
Multiprens USA chain and binders are compliant with the National Association of Chain Manufactures (NACM) Welded chain Specifications. Never exceed working load limits.
Operate binders only from a firm standing position on the ground. Stay clear of handle path as it may release suddenly.
All Multiprens binders are manufactured to meet or exceed all standards of the US Department of Transportation (DOT), California Highway Patrol (CHP), Federal Motor Carrier Safety Administration (FMCSA), Web Sling and Tie Down Association (WSTDA), Commercial Vehicle Safety Alliance (CVSA) and California Highway Patrol (CHP).
Multiprens winches offer a system for securing cargo on flatbed trailers and other vehicles. We stock a variety of winches available for specific applications.
Multiprens brings to the heavy duty trucking industry Pressure Release Load Bars. This INNOVATIVE and ECONOMICAL Pressure Release Load Bar solves the industry's problem of “blown out" trailer walls. 
Multiprens USA stocks a wide variety of Exterior and Interior Ratchet Buckles, Cam Buckles, and Heavy Duty end fittings for strap assemblies. 
Multiprens USA now adds towing and hauling to our line of products for the trucking industry. Whether you are going to haul a car a truck or any other vehicle we have the tie down for your specific requirement.